Lediga jobb som Kvalitetsingenjör/-tekniker, elkraft i Lund

Are you an experienced Equipment Compliance Engineer looking for an exciting opportunity to contribute to a high-impact project at the forefront of scientific research? Nipromec Group is now seeking a skilled Equipment Compliance Engineer to join our team in Lund, Sweden.
We are now looking for an Equipment Compliance Engineer for a project in Lund, Sweden. You’ll have the chance to join a leading international research facility that is one of the largest science and technology infrastructure projects currently underway. The facility features the most powerful linear proton accelerator ever constructed, with the ambitious vision of operating the world’s most advanced neutron source. This initiative aims to facilitate groundbreaking scientific discoveries in areas such as materials science, energy, health, and environmental research, while addressing some of the most pressing societal challenges of our time.
The position is scheduled to start ASAP. The estimated duration of the project is 6–12 months with the possibility of extension. Please note that this job requires 100% presence on-site in the office in Lund, Sweden.
About the Role:
As an Equipment Compliance Engineer, you will support the pre-installation equipment acceptance process by ensuring that equipment and components destined for the facility comply with relevant EU directives and standards. You will work closely with a small team to assess documentation, support CE-marking activities and contribute to quality control processes.
Key responsibilities:
CE-Marking Support: Ensure correct CE-marking processes are followed and all associated documentation is complete, accurate, and properly maintained.
Technical Documentation: Review and process technical documentation related to compliance and equipment approval as well as contribute to structured document management.
Quality Control Support: Participate in quality control and assurance (QC/QA) activities during the equipment acceptance phase, including documentation review and inspection follow-up.
Stakeholder Coordination: Work through compliance and documentation with suppliers and internal teams, and actively follow up to ensure timely progress and alignment with project deadlines.

What We’re Looking For:
Education: Higher technical or university degree in engineering or a closely related field.
Experience: Minimum of 7 years’ experience in leading/handling equipment compliance assessments and CE-marking of complex equipment or similar comparable tasks. Experience from motion control or ATEX (2014/34/EU) issues and experience in scientific or technical construction projects is deemed as an asset.
Proven knowledge in relevant EU directives and standards such as, but not limited to: Machinery Directive (2006/42/EC), Low Voltage Directive (2014/35/EU), and Electromagnetic Compatibility Directive (2014/30/EU).
Language Skills: Fluent in English, both verbal and written. Additional languages are a plus.

Who You Are:
Big-Picture Thinker and Problem Solver: You're an open minded problem solver and you see how each one issue may be a part of a much larger system. You produce practical, workable solutions to a range of problems.
Analytical and Organized: You have a sharp eye for detail and a clear, structured way of managing tasks and information.
Initiative-Driven: You proactively identify and act on opportunities to move processes forward.
Team-Oriented: You work effectively both independently and within small teams.
Progress-Focused: You thrive in fast-paced environments and can maintain momentum under time pressure.

For more information, please contact Nipromec Group HR & Recruiting Administrator Rania Salman:
Email: [email protected]
Phone: +46 (0)76-630 59 00
The position will be filled as soon as suitable candidate is found, so apply this position immediately. Please note that by applying you agree that your data is handled according to our recruitment register procedure.
About Us
Nipromec Group, founded in 2003, is an international consulting and engineering firm specializing in design and consulting services across a range of industries, with a strong focus on energy and construction. We have a well-established presence with offices in Rauma, Turku, Tampere, and Helsinki in Finland, as well as locations in Malmö, Sweden; Erlangen, Germany; and Bristol and London in the United Kingdom.
Finnish Nipromec Group consists of Nipromec Oy Ltd, Nipromec UK Ltd, N-Pro Resources Oy Ltd, Nipromec GmbH, Nipromec Sweden Ab, Nipromec EP and Nipromec Site Services units. Nipromec Group is audited and certified by Bureau Veritas and holds the ISO 9001/14001 and ISO 45001 certificates. 2023 Nipromec Group turnover was 22 million Euros. For more information please visit www.nipromec.com. Visa mindre

Alfa Laval Quality department in Lund, Sweden is looking for a Quality Inspector to join our team.
At Alfa Laval, where 140 years of rich history meets a dynamic start-up culture, we're renowned for our leading- edge technology to enable energy efficiency, clean energy, and water solutions. Our journey of innovation is far from over, and we invite you to join us in shaping a brighter future. We value collaboration, inclusion, and a learning mindset as we are paving the way towards net zero, making this vacancy the perfect opportunity to grow and thrive in your purposeful career.
We are looking for an experienced Quality Engineer that will be working as Quality Inspector to perform and document inspections in accordance with ASME III, ASME VIII and other Nuclear requirements.
About the department
You will be part of the Lund Quality department, that works with the manufacturing of heat exchangers, R&D and Business Units at Site Lund. You will be a part of a 21-person team.
Our task is to ensure that all products released are according to specifications and regulations.
About the role
As part of the Quality department, you will work closely all functions in the production process.
The quality department’s overall task is to secure that production follows requirements, rules, and regulations, which can be internal (Alfa Laval) or external (customer or regulatory authority). You are important in our improvements to avoid quality issues and to gain our customers confidence.
You will be an important representative of Alfa Laval meeting suppliers, customers, and authorities where a good command of English (verbal and written) is essential.
Your main tasks will be:
Secure that manufactured products are in accordance with the specified requirements and specifications
Publish reports and certificates confirming verification of quality control activities
Perform reviews of material certificates and manufacturing reports
Coordinate and handle nonconformities
Support, participate and lead in inspections and audits



Who you are
We believe you are confident in making decisions and acting on them. You have a sound level of integrity, are self-motivated. You understand the balance between inspecting, making hard decisions and support. Additionally, you are solutions focused and prepared to go the extra mile and are motivated by and drive improvements.
What you know
You have a degree from higher technical education
Experience from manufacturing companies
Experience from reviewing technical paint reports, chemical and mechanical requirements is an advantage
Knowledge in and experience from regulated manufacturing companies
Understanding and capability of interpreting international standards
Proven experience from technical documentation and certificates
English fluency (verbal and written)



We offer you a chance to be a leading part of a growing company in a department with high ambitions. The environment is recognized by a friendly climate and as part of the Quality department you are an integrated part in the whole production process. Visa mindre

Quality Engineer/ Quality Inspector
At Alfa Laval, we always go that extra mile to overcome the toughest obstacles. Our drive is to accelerate success for our customers, people, and planet. You can only achieve that by having dedicated people with a curious mind. Curiosity is the spark behind great ideas. And great ideas drive progress.
As a member of our team, you thrive in a truly diverse and inclusive workplace based on care and empowerment. You are here to make a difference. Constantly building bridges to the future with sustainable solutions that have an impact on our planet’s most urgent problems. Making the world a better place. Every day.
We are looking for an experienced Quality Engineer/Quality Inspector to perform and document inspections in accordance with ASME III, ASME VIII and Nuclear manuals.
About the department
You will be part of the Lund Quality department, which is a support function of the production of heat exchangers at the Lund manufacturing site. Our task is to ensure that all products released are according to specifications and regulations.
About the role
As part of the Quality department, you will work closely with most functions in the production process.
The quality department’s overall task is to secure that production follows requirements, rules, and regulations, which can be internal (Alfa Laval) or external (customer or regulatory authority). It is in the hands of this function to prevent and avoid potential quality issues and to document/verify solutions.
You will be an important representative of Alfa Laval meeting suppliers, customers, and authorities where a good knowledge of English (verbal and written) is essential.
Your main tasks will be:
Secure that manufactured products are in accordance with the specified requirements and specifications,
Publish reports and certificates confirming verification of quality control activities,
Perform reviews of material certificates and manufacturing reports,
Coordinate nonconformity deviations,
Support, participate and lead in inspections and audits



Who you are
Confident in making decisions and acting on them
A sound level of integrity
Self-motivated
Team oriented
Understand the balance between inspecting, making hard decisions and support,
Solutions focused and prepared to go the extra mile,
Motivated by and drives improvements,
Paying attention to detail and planning ahead

What you know
Degree from higher technical education or equivalent,
Experience from manufacturing companies.
Good knowledge in and experience from ASME III, ASME VIII and Nuclear.
Understanding and capability of interpreting international standards.
Proven experience in technical documentation and certificates,
Good knowledge of English.



We offer you a chance to be an important part of an expanding company. The environment is recognized by a friendly climate and as part of the Q department you are an integrated part in the whole production process, which offers a great chance to learn.
We review applications continuously, please send in yours no later than July 2nd. Visa mindre

The European Spallation Source is one of the most exciting, innovative and ground-breaking “Big Science” projects under construction today. Research with neutrons lies behind some of the most important materials and innovations which improve our everyday lives, our health and our environment – and ESS will be the most powerful neutron source for research in the world when it is fully operational in 2027.

ESS is now looking for a Neutron Polarisation and Optics Technician to join our Instrument Technologies team to support our neutron polarisation and neutron optics activities.

About the role:

You will begin by supporting the neutron polarisation equipment construction and neutron optics equipment site acceptance tests, quality control and alignment in collaboration with other teams at ESS, Institute Laue-Langevin (ILL) and other institutes.

No two work days are ever the same. The variety of tasks include, but are not limited to:


• Acquiring technical and safety knowledge of the constituents of neutron polarisation equipment.
• Building neutron polarisation equipment, commissioning and maintaining the equipment at the ESS, including a centralised polarisation system to be built at the ILL.
• Supporting user experiments that use neutron polarisation equipment.
• Building, commissioning and maintaining neutron optics equipment with the NSS Project Division teams.
• Maintaining the neutron polarisation & optics lab facilities and performing other workshop tasks including administrative aspects and documentation, procurement, stock control and inventory.

Shift work and on-call duties will be required as necessary. We will collaborate with the ILL in building a significant part of the equipment, and your work will very likely include a 12-18 month secondment to the ILL in Grenoble, France.

About you:

To thrive with us, you need to be driven, responsive and good at spotting both problems and opportunities. You need to be a highly motivated person who isn’t afraid to get your hands dirty!

First and foremost, we need someone who is suitably qualified and experienced. Ideally, you are a certified professional education in a field of engineering or science and you bring significant experience in an engineering or other highly technical environment. Relevant experience in a similar role is more critical than the type of qualification you hold.

What we are building is similar in complexity to medical equipment prototypes. We therefore need someone who


• Has proven mechanical dexterity and can manipulate precision jobs and assemble complex parts.
• Understands mechanical technical drawings and can perform loading/cutting calculations,
• Has experience with basic workshop equipment such as machining, soldering, for example.

Prior experience with laser systems and laser safety - and with mechanical and electronic processes - would be a distinct advantage.

We are building ESS from the ground up, so we need someone who is comfortable not only following procedures, but also creating them. We need you to be proactive in acquiring new knowledge and developing new skills. The tasks must be done well, on time and often unsupervised - so we need a hands-on self-starter who works in a structured, orderly, responsible and – most importantly – safe way. Formal safety trainings and a safe working history is a definite plus. With people having a diverse level of expertise working together, we're looking for a real team player: Someone who has excellent communication skills, who likes to work with different people, and is flexible in their approach.

The working language of ESS is English but it would be great if you could also work in Swedish as well. For this role, we need someone who can start as soon as possible.

What can we offer?

Aside from the opportunity to work at one of only 4 linear accelerator-based Spallation sources on the whole planet, you can also expect:


• An opportunity to contribute to the future discoveries within neutron science.
• A stunning, brand new workplace filled with innovative minds and brilliant people from across the globe.
• A challenging, exciting and fast-paced work environment.
• Market competitive compensation that is individual and differentiated according to role, responsibilities, individual skills, abilities and achievements.
• 25 days of annual leave, as well as more than 10 days of public holiday and company days off or days with limited working hours.
• Monthly pension contributions on top of your salary.
• Flexible working arrangements and a real work-life balance.
• Interested? We sure hope so.

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website.

Certain roles at ESS require health and safety checks, which may be required in the final stages of the recruitment process.

The last day for receiving application is Friday, September 30th 2022 - so submit your application as soon as soon as you can. Please quote the job reference number ESD-15051 in your application.

For more information regarding the ESS recruitment process, please follow this link https://europeanspallationsource.se/ess-recruitment-process or contact Daniel Nordin Baker – Recruitment partner – at [email protected]. For further information regarding the position, please contact the Recruiting Manager - Oliver Kirstein -  at [email protected]

For trade union information, please contact Unionen representative Conny Wendt at [email protected] or SACO/Swedish Association of Graduate Engineers representative Yngve Levinsen at [email protected].

We look forward to receiving your application soon! Visa mindre