Lediga jobb som Utvecklingsingenjör, el-tele i Lund

Se lediga jobb som Utvecklingsingenjör, el-tele i Lund. Genom att välja en specifik arbetsgivare kan du även välja att se alla jobb i Lund som finns hos arbetsgivaren.

Senior ADC/DAC Engineer

Ansök    Apr 23    Rasulson Consulting AB    Utvecklingsingenjör, el-tele
Senior konsult inom avancerade ADC/DAC-mätningar – Lund Är du en teknisk specialist med gedigen erfarenhet av högpresterande ADC/DAC-validering och ett brinnande intresse för digital design och inbyggda system? Vi söker nu en erfaren konsult för ett praktiskt, tekniknära uppdrag där du får arbeta i labbmiljö tillsammans med skickliga ingenjörsteam och ta ansvar för hela valideringskedjan – från planering till analys. Om rollen Som konsult kommer du att d... Visa mer
Senior konsult inom avancerade ADC/DAC-mätningar – Lund
Är du en teknisk specialist med gedigen erfarenhet av högpresterande ADC/DAC-validering och ett brinnande intresse för digital design och inbyggda system? Vi söker nu en erfaren konsult för ett praktiskt, tekniknära uppdrag där du får arbeta i labbmiljö tillsammans med skickliga ingenjörsteam och ta ansvar för hela valideringskedjan – från planering till analys.


Om rollen
Som konsult kommer du att driva avancerade mätningar av AD- och DA-omvandlare och ha en nyckelroll i utvecklingen av både mjukvara och hårdvara. Uppdraget kräver en kombination av djup teknisk förståelse och praktiska färdigheter inom både testautomation, mätinstrument och digital elektronik.
Arbetet är förlagt på plats i Lund, med start enligt överenskommelse. Urval sker löpande.


Dina huvudsakliga uppgifter:
Utföra noggranna mätningar och utvärderingar i labbmiljö
Felsöka och samarbeta tätt med designingenjörer
Utveckla testsystem och instrumentdrivrutiner
Bidra vid utveckling av testkort
Bearbeta mätdata samt sammanställa och presentera resultat

Vi söker dig som har:
? Civilingenjörsexamen eller doktorsexamen inom elektroteknik
? Minst fem års erfarenhet av avancerade mätningar och validering av ADC/DAC
? Utmärkta kunskaper i engelska, både i tal och skrift
? Självständighet och god förmåga att driva arbetet framåt
? Dokumenterad erfarenhet av tekniskt samarbete i team
Meriterande:
Erfarenhet av programmering för FPGA eller mikrokontrollersystem
Kunskap inom testautomatisering och hårdvarunära gränssnitt

Detta är ett uppdrag för dig som vill kombinera teknisk expertis med praktiskt arbete, och samtidigt bidra till att driva utvecklingen av avancerade mätlösningar i framkant.
Om Rasulson Consulting
Rasulson Consulting är ett specialiserat bemannings- och rekryteringsföretag inom IT-sektorn. Vi samarbetar med ledande tech-bolag och innovativa startupföretag för att erbjuda spännande karriärmöjligheter för dig med intresse för digital utveckling. Genom vår djupa tekniska förståelse och vårt starka nätverk kan vi snabbt matcha rätt kompetenser med rätt uppdrag. Hos oss får du personlig vägledning, regelbunden återkoppling och möjligheten att ta nästa steg i din IT-karriär. Visa mindre
Ansök

Technical Lead AI & ML

Ansök    Jan 14    Sigma Connectivity AB    Utvecklingsingenjör, el-tele
Job description We are seeking a brilliant Technical Lead to join our dynamic team. The ideal candidate should have deep technical knowledge in machine learning and artificial intelligence, including a strong understanding of relevant programming languages, tools, and tech-stacks as well as a passion for coaching others. As a Tech Lead AI/ML, you will be responsible for designing and implementing cutting-edge AI/ML solutions to help our clients solve compl... Visa mer
Job description
We are seeking a brilliant Technical Lead to join our dynamic team. The ideal candidate should have deep technical knowledge in machine learning and artificial intelligence, including a strong understanding of relevant programming languages, tools, and tech-stacks as well as a passion for coaching others. As a Tech Lead AI/ML, you will be responsible for designing and implementing cutting-edge AI/ML solutions to help our clients solve complex business problems.

You will work closely with our architects, development teams, project managers, and customers to ensure that our software solutions meet the highest standards of quality, scalability, and maintainability. You will lead, coordinate and coach other developers, while contributing hands-on technically to projects. You will also actively participate in the quotation process, together with Project office (PMO), sales and system engineers as applicable.

WHAT YOU WILL DO

Develop and implement advanced AI/ML algorithms, models, and systems to solve complex business problems.
Apply machine learning and artificial intelligence techniques to IoT solutions and device edge-AI solutions, including working with embedded systems and sensors.
Use cloud platforms such as AWS, Azure, and GCP to deploy and scale AI/ML solutions.
Assist sales and PMO with presales work with potential customers to understand their needs and recommend solutions.
Engage in dialogue with customers and other stakeholders to suggest technical solution(s) for customer’s ideas, vision and/or needs.
Answer technical questions from potential customers, direct and/or after investigation.
Understand the customer’s needs by asking open questions, being thoughtful, communicative, and creative.
Provide insights into technology through verbal pictures and sketched drawings.
Participate in the quotation process, together with PMO, sales and system engineers as applicable.
Work directly with our customers, document and present the solution and explain the technical decisions taken, including the tradeoffs and consequences of those decisions.


Contribute to the development of competence, best practices, tools, and frameworks to improve our AI/ML capabilities.
Collaborate with developers within and from other sites to ensure that our solutions are scalable and reliable.
Coach and guide developers to help them grow their technical skills and expertise.
Stay up-to-date with the latest AI/ML trends, tools, and technologies to ensure that our solutions are cutting-edge.


Basic qualifications
To succeed in this role, we expect you to have:

10+ years of overall work experience.
5+ years of experience in developing ML algorithms and AI-driven solutions.
Experience and proven track record with machine learning frameworks such as TensorFlow, PyTorch, and Scikit-learn.
Experience and proven track record with AI-driven IoT solutions in either consumer electronics, automotive, manufacturing, heavy equipment, mining or avionics.
Experience with edge-AI solutions, especially power, processing and memory optimization.
Strong knowledge of data structures, algorithms, and software engineering principles.
Excellent problem-solving and analytical skills.
Excellent communication and interpersonal skills.
Quick grasp of concepts and underlying patterns.
Ability to work in a collaborative, creative and team-oriented environment.
Ability to lead and positively influence others.


Preferred additional skills, personal traits, experience
Experience with ML on platforms such as Qualcomm, Nordics or Silabs.
Experience with big data technologies such as Hadoop, Spark, and Kafka to develop data pipelines for machine learning.
Visualizing and communicating data insights to both technical and non-technical stakeholders using data visualization tools such as Tableau and Power BI.
Experience developing web or mobile apps.


If you are a curious, adept, diligent, communicative, and collaborative leader with a passion for AI/ML and IoT solutions, we would love to hear from you.

We offer
Sigma Connectivity is a global leader in providing innovative technology solutions for businesses across industries. With over 19 years of experience in the industry, we specialize in developing custom software and hardware solutions, especially connected products within consumer electronics and IoT devices that help our clients optimize their operations and achieve their strategic business goals. Our solutions are scalable, reliable, cost-efficient and secure. We work closely with our clients to understand their vision and ensure that our solutions meet their specific needs and requirements.

At Sigma Connectivity, we believe in the power of technology to transform businesses and drive innovation. We are committed to delivering exceptional results for our clients, and we take pride in our ability to build long-lasting relationships based on trust, transparency, and mutual success.

Our team of 700 brilliant engineers are passionate about technology and are dedicated to designing and building cutting-edge solutions that leverage the latest advancements in technologies across industries. We foster a culture of sharing experiences and knowledge, with a touch of the Nordic work ethic. Our main office is in Lund, Southern Sweden. We ensure global presence with offices in US, UK, Poland, Germany and Denmark. We are a fast-growing company and are constantly looking for open-minded, talented people who want to be part of our journey. Within Sigma, you will never work alone. Visa mindre
Ansök

ADC/DAC Designer

Ansök    Jul 15    NordAmps AB    Utvecklingsingenjör, el-tele
ADC/DAC Designer: NordAmps, a semiconductor company, founded in 2017, and based in Lund, Sweden is looking for a Master +5 years’ experience or PhD ADC/DAC Designer. We develop In(Ga)As vertical nanowire transistors on Si-substrates with competitive device performance – high-frequency operation enabled by optimal material properties and by a vertical topology. NordAmps’ technology combines the high performance of III-V materials in a scalable technology... Visa mer
ADC/DAC Designer:
NordAmps, a semiconductor company, founded in 2017, and based in Lund, Sweden is looking for a Master +5 years’ experience or PhD ADC/DAC Designer.
We develop In(Ga)As vertical nanowire transistors on Si-substrates with competitive device performance – high-frequency operation enabled by optimal material properties and by a vertical topology. NordAmps’ technology combines the high performance of III-V materials in a scalable technology with cost-effectiveness supported by silicon substrates.
With a dedicated focus on innovation and excellence, we aim to push the boundaries of what is possible in the field of readout circuits for quantum computing. As part of our ongoing commitment to excellence in an EU project bringing together key players from the semiconductor industry and academia in Europe, we are currently seeking a highly skilled Master +5 years’ experience or PhD ADC/DAC Designer to join our dynamic team.
Description of the Position:
As an ADC/DAC Designer at NordAmps AB, you will be responsible for a demonstrator in Hardware/Software for signal generation and detection circuits for readout of quantum computing signal. The design task involves topics such as:
-Systemization,
-A Sample & Hold block,
-A Switch cap Digital-to-Analog Converter (DAC)
-A CLK phase generator for Analog-to-Digital Converter (ADC)
Qualifications:
-Proven experience in the design and development of ADCs and DACs, preferably in a high-speed application.
-Proficiency in analog and mixed-signal circuit design, simulation, and layout.
-Strong understanding of signal processing techniques and principles.
-Understanding of noise analysis and mitigation strategies in analog circuits.
-Excellent problem-solving skills and attention to detail.
-Effective communication and teamwork abilities.
Additional Desired Competence:
-Experience with semiconductor fabrication processes and technologies.
-Familiarity with quantum computing concepts and architectures.
-Knowledge of digital signal processing algorithms and techniques.
-Proficiency in programming languages such as Python, MATLAB/Octave, or Verilog/Verilog-A.
-Experience with CAD tools for circuit design and simulation, such as Cadence Virtuoso
-Self-motivated
-Experience working within an international team environment, demonstrating the ability to collaborate effectively across diverse cultural boundaries.
Application:
Please send an email with your application including a CV and personal letter.
Start date: At the earliest.
Location: NordAmps AB, Scheelevägen 15, Ideon Alfa 4, 223 63 Lund
https://nordamps.com
Questions about the position will be answered by: Lars Tilly, CEO NordAmps AB, [email protected]
+46 739 311 052
Öppen för alla
Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov. Visa mindre
Ansök

Energy Performance Engineer (756163)

Ansök    Nov 6    Ericsson AB    Utvecklingsingenjör, el-tele
Grow with us About this opportunity We are looking for a new member to join the Energy Performance team in Lund! We are creating exciting end-to-end RAN solutions at Ericsson, but we also think there are great opportunities to improve them using clever engineering and smart ideas. In our group, we are strengthening our focus to make our products more energy efficient – through both system design, prototyping and system verification. We are especially i... Visa mer
Grow with us
About this opportunity

We are looking for a new member to join the Energy Performance team in Lund!

We are creating exciting end-to-end RAN solutions at Ericsson, but we also think there are great opportunities to improve them using clever engineering and smart ideas. In our group, we are strengthening our focus to make our products more energy efficient – through both system design, prototyping and system verification. We are especially interested in how Baseband and Radio products can operate as energy efficient as possible in Radio Access Networks. Focus is on 4G and 5G networks with 6G approaching rapidly as well.

New innovative improvement ideas always need to match our customer needs, so analyzing our customer networks data from deployed products and features is a necessity for successful innovation.

This is your chance to significantly influence reduction of energy consumption and CO2 emissions in mobile networks around the world, from within a world leader in communications technology as part of your daily working assignment!

What you will do

We work in a uniquely versatile group, with a very broad range of competences ranging from System Verification, SW development, HW development, good knowledge of 3GPP specifications and good knowledge of UE behavior. Our main asset as a team is the combined understanding of how HW, SW, system design and clever features need to interact in the right way across all parts of a radio base station to minimize power consumption in a Radio Access Network.

In our team, we perform both hands-on measurements (for example with oscilloscopes, spectrum analyzers, power analyzers and heat cameras) as well as System Verification with trace and KPI analysis to fully map out the way our products behave in our end to end high-touch lab in Lund. We are utilizing the Energy Performance lab for manual exploratory, innovative purposes as well as automized System Verification.

Now we want to expand our team with someone with a clear interest to take part in our increased focus in analysis of our customer networks data as well as our strengthened ambition for a fully automized System Verification setup.

Join our Team
You will bring

A background from and an interest in programming and data/problem analysis. Preferably experience from development of Radio Access Networks. Most importantly an open mind, with an eager to develop and cooperate within a self-organizing team, but also building your personal networks outside the team as the Energy Performance requires all parts of the system to come together for effective solutions.

We are therefore looking for candidates meeting the following requirements:
· A Master of Science in Engineering
· Strong experience from programming
· Good analytical skills, to be able to evaluate feature gain from different ideas
· Communicates well in English, both in writing and verbally
· A strong interest in reducing the energy consumption of Ericsson products and being a part of our fight to reduce CO2 emissions

A strong candidate will also cover several of these wishes:
· Being curious and open to exploring new ideas
· Want to help others understand and learn
· Has a good understanding of Radio Access Networks and is willing to learn more
· Proficiency with data analytics tools such as Python (with libraries like Pandas, NumPy, SciPy), R, and

Why join Ericsson?

At Ericsson, you´ll have an outstanding opportunity. The chance to use your skills and imagination to push the boundaries of what´s possible. To build never seen before solutions to some of the world’s toughest problems. You´ll be challenged, but you won’t be alone. You´ll be joining a team of diverse innovators, all driven to go beyond the status quo to craft what comes next. Visa mindre
Ansök

Mechanical Engineer

Ansök    Maj 15    OptiCept Technologies AB    Utvecklingsingenjör, el-tele
About us OptiCept provides the food and plant industry with high-tech solutions that contribute to a more sustainable world and enable climate-smart economic growth through patented technology within Pulsed Electric Field and Vacuum Infusion. About the role In this role, you will be part of the mechanics department at OptiCept where your main focus will be on the mechanical development of new and existing machines. You are offered A varied role at a growin... Visa mer
About us
OptiCept provides the food and plant industry with high-tech solutions that contribute to a more sustainable world and enable climate-smart economic growth through patented technology within Pulsed Electric Field and Vacuum Infusion.
About the role
In this role, you will be part of the mechanics department at OptiCept where your main focus will be on the mechanical development of new and existing machines.
You are offered
A varied role at a growing company where you are given responsibilities right from the start and where you are encouraged to come up with suggestions for improvement.
The opportunity to be part of a company that is at the forefront of its industry and work with the latest and unique technology.

Work tasks
As a mechanical engineer, you will have a focus on developing and improving existing machines for production and making sure that it is producible.

We are looking for
Has a Bachelor’s Degree or higher in Mechanical Engineering. Experience in electrical engineering is preferred, but not required.
Has experience with CAD design. Experience with Autodesk products is preferred, but not required.
Isn’t reluctant to take initiative.


It is meritorious if you have previous experience in PLM processes, simulation, or mechanical development. It is also advantageous if you have worked with technical documentation or with similar tasks in an industrial product development environment.
Knowledge can be gained through education, experience, or self-taught.
To succeed in the role, your personal skills are:
Structured
Self-sufficient
Results-oriented



Öppen för alla
Vi fokuserar på din kompetens, inte dina övriga förutsättningar. Vi är öppna för att anpassa rollen eller arbetsplatsen efter dina behov. Visa mindre
Ansök

Senior Verification Engineer

Ansök    Apr 18    Arm Sweden AB    Utvecklingsingenjör, el-tele
Job Overview: Arm’s verification engineers continuously push the boundaries of what is possible with simulation, formal, and emulation tools to produce industry-leading GPU IP. At arm, an experienced verification engineer not only efficiently finds the design bugs but also encourages others to show and tell how verification can be done in an innovative way. If working on groundbreaking technology in a world-class GPU design team sounds like an exciting cha... Visa mer
Job Overview:
Arm’s verification engineers continuously push the boundaries of what is possible with simulation, formal, and emulation tools to produce industry-leading GPU IP. At arm, an experienced verification engineer not only efficiently finds the design bugs but also encourages others to show and tell how verification can be done in an innovative way. If working on groundbreaking technology in a world-class GPU design team sounds like an exciting challenge then the role as an
Arm Verification Engineer is for you.


As an important member of our IP Verification team, the engineer will be implementing constrained-random simulation techniques using SystemVerilog and UVM. The candidate will be involved in hands-on project work, collaborate with other IP verification specialists across Arm sites, and knowledge-share with other engineers. Our verification methodology includes simulation, emulation, prototyping, modeling, and formal proofs using innovative in-house tools and techniques.


Arm’s Lund design center is located in Lund, a city voted the best place to live in Sweden and considered a European technology hub. The Lund graphics hardware design team is a well-established team with engineers from more than 10 different nationalities. In this international environment, we collaborate with a growth mindset and inclusive approach which enables us to design the world's most shipped Graphics processor Mali. Due to our considerable success to date and continuing strong customer interest in Mali GPUs, the Lund engineering team is looking to further grow and strengthen through the hiring of an experienced Graphics Verification Engineer.


Responsibilities:
The role covers contributing to all phases of the hardware verification flow. This includes:
Reviewing and assessing proposed design changes.
Ownership of a specific area of a GPU project ranging from unit-level/multi-unit level testbench development through to the overall verification methodology.
Responsibility for producing test plans and verification strategies.
Planning, tracking, and coordinating your own tasks and collaborating with the team to meet high-quality goals at the planned time.
Suggest and deploy innovation and improvements for the team and group.
Evaluating and determining the causality of different issues throughout the verification process.



Required Skills and Experience :
3+ years of proven track record in crafting and implementing verification environments for sophisticated RTL designs. Experience in architecting and designing test benches from scratch.
Proficient in the use of hardware verification languages e.g. SystemVerilog or Specman ‘e’ based on UVM.
Understanding of end-to-end verification processes (requirement definition, test plan creation to verification closure, debug).
Ability to quickly understand and apply sophisticated specification detail
Understanding of the fundamentals of computer architecture, with an emphasis on pipelining, exception handling, interrupt/event handling, memory systems, and multi-threading. Preferably experienced with processors and bus protocols (AMBA AXI, CHI) and processor-based systems.
Good university degree in computer science, electronics engineering or microelectronics. Other science graduates will be considered with relevant experience.



“Nice To Have” Skills and Experience :
C/C++, Shell Scripting, Python.
Continuous integration platforms such as Jenkins, version control tool git.
Experience in verifying design with a reference model (System C/C++).
Exposure to the simulation tools such as Xcellium, vManager, QuestaSim, Specman, and Verdi from Cadence, Mentor, and Synopsys.
Experience in working with system architects for design requirements definition.



In Return:
All arm employees are provided with vital training to succeed in their respective roles. As well as a friendly and high-performance working environment, Arm offers a competitive benefits package in Sweden including private medical insurance, RSU, 30 days of annual leave, sabbatical, supplementary pension, and wellness benefits. Visa mindre
Ansök

Junior ASIC & FPGA Verification Engineer (738925)

Ansök    Dec 6    Ericsson AB    Utvecklingsingenjör, el-tele
About this opportunity At Ericsson Silicon ASIC and FPGA we develop hardware components used in Radio products and Base stations. The complexity of these components requires verification procedures that ensure fail-proof operation in all our products worldwide. The verification effort is vast in both complexity and scope and is the deciding factor for success. We are looking for a person who wants to join one of the teams in our attempt to be champions in... Visa mer
About this opportunity
At Ericsson Silicon ASIC and FPGA we develop hardware components used in Radio products and Base stations. The complexity of these components requires verification procedures that ensure fail-proof operation in all our products worldwide. The verification effort is vast in both complexity and scope and is the deciding factor for success. We are looking for a person who wants to join one of the teams in our attempt to be champions in our field!


What you will do
This verification assignment involves planning, execution, and evaluation of test cases and test environments, where the perspective spans the range from minute details to the bird's eye view. Tasks include writing test bench components, test cases, coverage models, and crafting test plans. You are encouraged to improve your ways of working and participate daily with your colleagues.


You will bring
Knowledge in UVM
Knowledge of System Verilog
Master of Science education in Electronics, Computer Science, or similar
Relevant work experience in the FPGA industry, and preferably several years in testing assignments
Experience in scrum methodology.
A forward-thinking, hardworking, and creative personality. You are an outstanding teammate who enjoys a fast-paced work environment and adopts the challenge.



Why join Ericsson?
At Ericsson, you´ll have an outstanding opportunity. The chance to use your skills and creativity to push the boundaries of what´s possible. To build never seen before solutions to some of the world’s toughest problems. You´ll be challenged, but you won’t be alone. You´ll be joining a team of diverse innovators, all driven to go beyond the status quo to craft what comes next.


What happens once you apply?
Click Here to find all you need to know about what our typical hiring process looks like.


Location for this role: Lund, Sweden.
Responsible recruiter: Sofia Kolbovich ([email protected])
Note that we cannot process applications sent via email! We review applications on a rolling basis, so don't hesitate to apply. Visa mindre
Ansök

Technical Lead AI & ML

Ansök    Mar 18    Sigma Connectivity AB    Utvecklingsingenjör, el-tele
Job description We are seeking a brilliant Technical Lead to join our dynamic team. The ideal candidate should have deep technical knowledge in machine learning and artificial intelligence, including a strong understanding of relevant programming languages, tools, and tech-stacks as well as a passion for coaching others. As a Tech Lead AI/ML, you will be responsible for designing and implementing cutting-edge AI/ML solutions to help our clients solve compl... Visa mer
Job description
We are seeking a brilliant Technical Lead to join our dynamic team. The ideal candidate should have deep technical knowledge in machine learning and artificial intelligence, including a strong understanding of relevant programming languages, tools, and tech-stacks as well as a passion for coaching others. As a Tech Lead AI/ML, you will be responsible for designing and implementing cutting-edge AI/ML solutions to help our clients solve complex business problems.

You will work closely with our architects, development teams, project managers, and customers to ensure that our software solutions meet the highest standards of quality, scalability, and maintainability. You will lead, coordinate and coach other developers, while contributing hands-on technically to projects. You will also actively participate in the quotation process, together with Project office (PMO), sales and system engineers as applicable.

WHAT YOU WILL DO

Develop and implement advanced AI/ML algorithms, models, and systems to solve complex business problems.
Apply machine learning and artificial intelligence techniques to IoT solutions and device edge-AI solutions, including working with embedded systems and sensors.
Use cloud platforms such as AWS, Azure, and GCP to deploy and scale AI/ML solutions.
Assist sales and PMO with presales work with potential customers to understand their needs and recommend solutions.
Engage in dialogue with customers and other stakeholders to suggest technical solution(s) for customer’s ideas, vision and/or needs.
Answer technical questions from potential customers, direct and/or after investigation.
Understand the customer’s needs by asking open questions, being thoughtful, communicative, and creative.
Provide insights into technology through verbal pictures and sketched drawings.
Participate in the quotation process, together with PMO, sales and system engineers as applicable.
Work directly with our customers, document and present the solution and explain the technical decisions taken, including the tradeoffs and consequences of those decisions.


Contribute to the development of competence, best practices, tools, and frameworks to improve our AI/ML capabilities.
Collaborate with developers within and from other sites to ensure that our solutions are scalable and reliable.
Coach and guide developers to help them grow their technical skills and expertise.
Stay up-to-date with the latest AI/ML trends, tools, and technologies to ensure that our solutions are cutting-edge.


Basic qualifications
To succeed in this role, we expect you to have:

10+ years of overall work experience.
5+ years of experience in developing ML algorithms and AI-driven solutions.
Experience and proven track record with machine learning frameworks such as TensorFlow, PyTorch, and Scikit-learn.
Experience and proven track record with AI-driven IoT solutions in either consumer electronics, automotive, manufacturing, heavy equipment, mining or avionics.
Experience with edge-AI solutions, especially power, processing and memory optimization.
Strong knowledge of data structures, algorithms, and software engineering principles.
Excellent problem-solving and analytical skills.
Excellent communication and interpersonal skills.
Quick grasp of concepts and underlying patterns.
Ability to work in a collaborative, creative and team-oriented environment.
Ability to lead and positively influence others.


Preferred additional skills, personal traits, experience
Experience with ML on platforms such as Qualcomm, Nordics or Silabs.
Experience with big data technologies such as Hadoop, Spark, and Kafka to develop data pipelines for machine learning.
Visualizing and communicating data insights to both technical and non-technical stakeholders using data visualization tools such as Tableau and Power BI.
Experience developing web or mobile apps.


If you are a curious, adept, diligent, communicative, and collaborative leader with a passion for AI/ML and IoT solutions, we would love to hear from you.

We offer
Sigma Connectivity is a global leader in providing innovative technology solutions for businesses across industries. With over 19 years of experience in the industry, we specialize in developing custom software and hardware solutions, especially connected products within consumer electronics and IoT devices that help our clients optimize their operations and achieve their strategic business goals. Our solutions are scalable, reliable, cost-efficient and secure. We work closely with our clients to understand their vision and ensure that our solutions meet their specific needs and requirements.

At Sigma Connectivity, we believe in the power of technology to transform businesses and drive innovation. We are committed to delivering exceptional results for our clients, and we take pride in our ability to build long-lasting relationships based on trust, transparency, and mutual success.

Our team of 700 brilliant engineers are passionate about technology and are dedicated to designing and building cutting-edge solutions that leverage the latest advancements in technologies across industries. We foster a culture of sharing experiences and knowledge, with a touch of the Nordic work ethic. Our main office is in Lund, Southern Sweden. We ensure global presence with offices in US, UK, Poland, Germany and Denmark. We are a fast-growing company and are constantly looking for open-minded, talented people who want to be part of our journey. Within Sigma, you will never work alone. Visa mindre
Ansök

Verifieringsingenjör

Ansök    Feb 13    Northwide X AB    Utvecklingsingenjör, el-tele
Om NorthWide X AB NorthWide X AB är ett IT-, Management- och Marknadsföringsbolag som erbjuder konsultation i världsklass. Där man satsar på kvalitet hela vägen, att leverera det kunderna eftersöker, i precision. Vi erbjuder precis det vi heter, North Wide Experience, konsulter med bred erfarenhet i Sverige. Hos oss får du möjlighet att jobba med spännande kunder och teknik samtidigt som du får växa tillsammans med ett härligt gäng. Om jobbet/Arbetsuppgift... Visa mer
Om NorthWide X AB
NorthWide X AB är ett IT-, Management- och Marknadsföringsbolag som erbjuder konsultation i världsklass. Där man satsar på kvalitet hela vägen, att leverera det kunderna eftersöker, i precision. Vi erbjuder precis det vi heter, North Wide Experience, konsulter med bred erfarenhet i Sverige.
Hos oss får du möjlighet att jobba med spännande kunder och teknik samtidigt som du får växa tillsammans med ett härligt gäng.
Om jobbet/Arbetsuppgifter
Som verifieringsingenjör har du möjligheter att göra skillnad genom att påverka verifieringsstrategin/metodiken och bidra till produkternas kvalitet, att utveckla testbänkar på enhet eller toppnivå med hjälp av simulering och formella metoder.
Personliga egenskaper/Arbetsuppgifter:
Stark disciplin och uppmärksamhet på detaljer för att säkerställa effektiv verifiering av hög kvalitet som minimerar felflykt till högre nivåer av validering.
Täckningsdriven verifieringsexpertis, i design med hög komplexitet.
Erfarenhet av verifiering på blocknivå, toppnivå och systemnivå Erfarenhet av Verilog/SystemVerilog/VHDL.
Erfarenhet av specifikation, skapande och felsökning av SystemVerilog/UVM-slumpmässiga testbänkar.
Erfarenhet av att planera verifieringsprocessen och göra realistiska ansträngningar och tidsskalauppskattningar.



Krav för tjänsten
Verifiering av hög kvalitet.
Verifiering på systemnivå.
UVM-verifiering.
SystemVerilog.
Verifiering av IP-blocknivå.
Maskininlärning.
Komplex design.
VHDL/Verilog. Visa mindre
Ansök

Graduate Engineer

Ansök    Mar 7    Arm Sweden AB    Utvecklingsingenjör, el-tele
We have a phenomenal opportunity for a Graduate System Analysis Engineer to join our Machine Learning System Analysis team in Lund, Sweden. If you would like to craft the future of mobile devices, then read on! Take the chance to join a multinational, highly motivated and cross-site team. The team is responsible for the test infrastructure, verification and performance analysis of our ML specific HW accelerators. Working in our dedicated and diverse te... Visa mer
We have a phenomenal opportunity for a Graduate System Analysis Engineer to join our Machine Learning System Analysis team in Lund, Sweden. If you would like to craft the future of mobile devices, then read on!


Take the chance to join a multinational, highly motivated and cross-site team. The team is responsible for the test infrastructure, verification and performance analysis of our ML specific HW accelerators.


Working in our dedicated and diverse teams usually involves developing and performing automated tests in python for our software and hardware IP. The work requires a broad technical competence to face the ever new challenges when testing our innovative technology on new platforms and operating systems.


A typical day includes a variety of tasks. The team works in an agile environment starting with a daily sync meeting. After that you could be improving the automated testing framework using python scripting, analysing and crafting tests for new product features and requirements, investigating issues and file new tickets, debugging or do deeper performance analysis and presentations.
Responsibilities:
As a team we are responsible for developing and maintaining the automated test infrastructure, implement and analyse tests needed for ensuring functional quality as well as performance requirements, communicate status and insights, flag issues and sign off releases.


Required Skills and Experience :
You have no or little work experience after your graduation or are about to graduate with a Bachelor’s or Master’s degree in Computer science, Electrical engineering or a related field with a good academic record.
Please include your University Transcript (Grade sheet) to your application together with your English CV
You enjoy solving problems in collaboration with your colleagues both in and outside of the team. Good python knowledge is essential.
You have a passion for automation, analysis and improvements.
A high level of pro-activity and initiative as well as willingness to take on varied technical challenges.
You have strong communication skills, inter-cultural awareness and you embrace diversity.



“Nice To Have” Skills and Experience :
If you have some knowledge about working with pre-silicon platforms, building test infrastructure, low level debugging, or some familiarity with data analysis that would be phenomenal!


In Return:
At Arm, you will enjoy working in a highly stimulating collaborative atmosphere. Our team works closely with other software, hardware and system teams across the company.
You will have a chance to share ideas with and learn new skills from the best engineers in the world. We work in small teams, so your contributions will really make a difference. Visa mindre
Ansök

Verification Engineer

Ansök    Apr 4    Arm Sweden AB    Utvecklingsingenjör, el-tele
Job Overview: Arm’s verification engineers continuously push the boundaries of what is possible with simulation, formal, and emulation tools to produce industry-leading GPU IP. At arm, an experienced verification engineer not only efficiently finds the design bugs but also encourages others to show and tell how verification can be done in an innovative way. If working on groundbreaking technology in a world-class GPU design team sounds like an exciting cha... Visa mer
Job Overview:
Arm’s verification engineers continuously push the boundaries of what is possible with simulation, formal, and emulation tools to produce industry-leading GPU IP. At arm, an experienced verification engineer not only efficiently finds the design bugs but also encourages others to show and tell how verification can be done in an innovative way. If working on groundbreaking technology in a world-class GPU design team sounds like an exciting challenge then the role as an
Arm Verification Engineer is for you.


As an important member of our IP Verification team, the engineer will be implementing constrained-random simulation techniques using SystemVerilog and UVM. The candidate will be involved in hands-on project work, collaborate with other IP verification specialists across Arm sites, and knowledge-share with other engineers. Our verification methodology includes simulation, emulation, prototyping, modeling, and formal proofs using innovative in-house tools and techniques.


Arm’s Lund design center is located in Lund, a city voted the best place to live in Sweden and considered a European technology hub. The Lund graphics hardware design team is a well-established team with engineers from more than 10 different nationalities. In this international environment, we collaborate with a growth mindset and inclusive approach which enables us to design the world's most shipped Graphics processor Mali. Due to our considerable success to date and continuing strong customer interest in Mali GPUs, the Lund engineering team is looking to further grow and strengthen through the hiring of an experienced Graphics Verification Engineer.


Responsibilities:
The role covers contributing to all phases of the hardware verification flow. This includes:
Reviewing and assessing proposed design changes.
Ownership of a specific area of a GPU project ranging from unit-level/multi-unit level testbench development through to the overall verification methodology.
Responsibility for producing test plans and verification strategies.
Planning, tracking, and coordinating your own tasks and collaborating with the team to meet high-quality goals at the planned time.
Suggest and deploy innovation and improvements for the team and group.
Evaluating and determining the causality of different issues throughout the verification process.



Required Skills and Experience :
3+ years of proven track record in crafting and implementing verification environments for sophisticated RTL designs. Experience in architecting and designing test benches from scratch.
Proficient in the use of hardware verification languages e.g. SystemVerilog or Specman ‘e’ based on UVM.
Understanding of end-to-end verification processes (requirement definition, test plan creation to verification closure, debug).
Ability to quickly understand and apply sophisticated specification detail
Understanding of the fundamentals of computer architecture, with an emphasis on pipelining, exception handling, interrupt/event handling, memory systems, and multi-threading. Preferably experienced with processors and bus protocols (AMBA AXI, CHI) and processor-based systems.
Good university degree in computer science, electronics engineering or microelectronics. Other science graduates will be considered with relevant experience.



“Nice To Have” Skills and Experience :
C/C++, Shell Scripting, Python.
Continuous integration platforms such as Jenkins, version control tool git.
Experience in verifying design with a reference model (System C/C++).
Exposure to the simulation tools such as Xcellium, vManager, QuestaSim, Specman, and Verdi from Cadence, Mentor, and Synopsys.
Experience in working with system architects for design requirements definition.



In Return:
All arm employees are provided with vital training to succeed in their respective roles. As well as a friendly and high-performance working environment, Arm offers a competitive benefits package in Sweden including private medical insurance, RSU, 30 days of annual leave, sabbatical, supplementary pension, and wellness benefits. Visa mindre
Ansök

GPU Tools, Principal Software Engineer

Ansök    Feb 7    Arm Sweden AB    Utvecklingsingenjör, el-tele
Job Overview: We have a great opportunity for a software engineer to join our Graphics team in Lund, Sweden, which is one of the places where we develop the Mali GPU. If you would like to be part of shaping the future of mobile devices, then read on! This is a chance to join a new team that we are forming. The team is responsible for development of software tools for verification of the GPU hardware. These tools are used to verify the functionality and p... Visa mer
Job Overview:
We have a great opportunity for a software engineer to join our Graphics team in Lund, Sweden, which is one of the places where we develop the Mali GPU. If you would like to be part of shaping the future of mobile devices, then read on!


This is a chance to join a new team that we are forming. The team is responsible for development of software tools for verification of the GPU hardware. These tools are used to verify the functionality and performance of the GPUs


This team will work with other teams across geographical boundaries to understand the requirements on the tooling and implement support for new features. As a principal engineer, you are expected to lead the technical work.


The work requires an appetite for low level programming. You will learn how a graphics processor works on a detailed level, and how it translates software API calls into hardware workloads.


Responsibilities:
What will you do as part of the team? The first stage of our work is analysing the new features in our GPUs in development. We then implement the corresponding support in our tools, and deliver software that proves both the new functionality and the performance we are expecting to see from them.


You will work closely together with other teams in arm - including the hardware team, our modelling team, and our software teams.


Required Skills and Experience :
You hold a Bachelor’s or Master’s degree in Computer science, Electrical engineering or a related field.
C++
Experience from embedded software, low level software or bare metal programming
Strong understanding of computer architecture (CPU, memory, MMU, caches etc).
Working in Linux environment
Proficient in English language



“Nice To Have” Skills and Experience :
Knowledge of graphics programming or graphics APIs
Knowledge of graphics fundamentals, e.g. GPU graphics pipeline and shaders.
Building software models of hardware
Other programming languages
Android



In Return:
All arm employees are provided with training to succeed in their respective roles. We work in an inclusive and high-performance environment and Arm offers a competitive benefit package in Sweden including private medical insurance, 30 days of annual leave, sabbatical, supplementary pension, and wellness benefits. Visa mindre
Ansök

System Test Engineer - Machine Learning

Ansök    Feb 1    Arm Sweden AB    Utvecklingsingenjör, el-tele
Job Overview We have a phenomenal opportunity for a System Test Engineer to join our Machine Learning System Analysis team in Lund, Sweden. If you would like to craft the future of mobile devices, then read on! You will have the chance to join a multinational, highly motivated and cross-site team. The team is responsible for functional verification and performance analysis of our ML specific HW accelerators. Working in our dynamic and diverse teams usually... Visa mer
Job Overview
We have a phenomenal opportunity for a System Test Engineer to join our Machine Learning System Analysis team in Lund, Sweden. If you would like to craft the future of mobile devices, then read on!
You will have the chance to join a multinational, highly motivated and cross-site team. The team is responsible for functional verification and performance analysis of our ML specific HW accelerators.
Working in our dynamic and diverse teams usually involves developing and executing automated tests for our software and hardware IP.
The team covers a wide range of software and hardware levels, application domains, workloads and types of analysis to get a full and accurate picture of ML performance capabilities, limitations and improvement opportunities.Responsibilities
Develop tests and infrastructure for our fully automated test flow, including functional and performance testing, as well as visualisation and report generation of the results.
Analyse and understand Machine Learning workloads, systems and performance expectations.
Produce technical summaries for a range of audiences, based on detailed analysis and interpretation of results.
Share knowledge and influence others, both within ML Group and wider across Arm.

Required Skills and Experience
You have experience working with SW development or automated testing.
Good python knowledge is essential as that is the basis of our scripts and infrastructure.
You have a passion for test, analysis and improvements.
A high level of pro-activity, initiative and problem solving skills. as well as willingness to take on varied technical challenges.
You have strong communication skills, inter-cultural awareness and you embrace diversity.

“Nice To Have” Skills and Experience
Testing and test automation
Linux development environments, bash scripting.
Data analysis and visualisation, for example Jupyter Notebooks
Machine Learning knowledge.
Experience and familiarity with high level programming languages (e.g. C, Java)
Jenkins, Docker and MongoDB

In Return
All Arm employees are provided with vital training to succeed in their respective roles. As well as a friendly and high-performance working environment, Arm offers a competitive benefits package in Sweden including private medical insurance, 30 days of annual leave, sabbatical, supplementary pension, wellness benefits.You will be working with a bunch of enthusiastic and brilliant colleagues. At Arm, we are proud to have a set of behaviours that reflect our DEI (Diversity, Equity & Inclusion) culture and guide our decisions, defining how we work together to shape extraordinary! These behaviours are assessed as part of the recruitment process: We not I, Do great things, and Be your brilliant self.At Arm Lund we have a hybrid working approach where we offer people the flexibility to work part of their time from home and part of the time from the office. Visa mindre
Ansök

Embedded Engineer

Ansök    Feb 7    Arm Sweden AB    Utvecklingsingenjör, el-tele
The video Sparking the World’s Potential describes it well: Arm is wherever compute happens. And today, intelligent computing happens everywhere. From the smallest IoT devices, to large scale data centres, and everything between and beyond. Within the GPU Modelling Team, we have an amazing opportunity for an experienced developer. We are a distributed team, and this position is open for our offices in Trondheim (Norway) and Lund (Sweden). Our models are d... Visa mer
The video Sparking the World’s Potential describes it well: Arm is wherever compute happens. And today, intelligent computing happens everywhere. From the smallest IoT devices, to large scale data centres, and everything between and beyond.
Within the GPU Modelling Team, we have an amazing opportunity for an experienced developer. We are a distributed team, and this position is open for our offices in Trondheim (Norway) and Lund (Sweden).
Our models are detailed representations of the micro-architecture of our GPU products; They are extensively used by teams within Arm for different use cases and are delivered to some of our external partners.
Responsibilities:
Your role will primarily be to model different aspects of our upcoming GPUs, taking ownership of some of the components. You will be working with dedicated and engaged people across the globe as part of our multi-site development projects. We develop in C++ in a UNIX environment and your work will have a large impact on the design and quality of the GPUs and ultimately on the success of Arm.
If you would like to craft the future of energy-efficient devices, this is the place to be!
Required Skills and Experience :
We are looking for someone with
Excellent knowledge of C++ programming
A good understanding of computer architecture
Experience with UNIX
Good problem solving and debugging skills
Good English communication (both written and verbal)

A Bachelors, Masters or PhD (e.g. computer science, electrical engineering or a related field) is a must have.
“Nice To Have” Skills and Experience :
Knowledge of computer graphics, scripting languages (e.g., Python) or modelling platforms (e.g., SystemC, gem5) would be a plus.
In Return:
All arm employees are provided with vital training to succeed in their respective roles. As well as a friendly and high-performance working environment, Arm offers a competitive benefits package in Sweden including private medical insurance, 30 days of annual leave, sabbatical, supplementary pension, and wellness benefits. Visa mindre
Ansök

Team Leader - Wireless Communication Research 3GPP

Ansök    Sep 13    Huawei Technologies Sweden AB    Utvecklingsingenjör, el-tele
You will lead one of our research teams, responsible for generating and evaluating innovative ideas for 5G and next-generation radio networks and associated technologies and solutions. The team addresses 3GPP standardization of current and future communication systems and is responsible for creating and driving Intellectual Property Rights and standardization proposals. The team is also communicating standardization activities and trends to other R&D teams... Visa mer
You will lead one of our research teams, responsible for generating and evaluating innovative ideas for 5G and next-generation radio networks and associated technologies and solutions. The team addresses 3GPP standardization of current and future communication systems and is responsible for creating and driving Intellectual Property Rights and standardization proposals. The team is also communicating standardization activities and trends to other R&D teams and helps coordinate relevant research and development activities.

Our research team cooperates with external partners, and you will explore potential University cooperations for emerging research concepts with potential for future radio access technologies. Our research team covers multiple functional layers and workgroups within 3GPP, and consists of both 3GPP delegates and back-office researchers.

As the team leader, you are expected to have deep knowledge in wireless communications and actively participate in different tasks such as long-term research, IPR generation, and external cooperations. In addition, you will be responsible for recruitment to the team.

Qualifications & experience

- A Master’s degree in Electrical Engineering / Communications Systems or similar education is required.
- It is required to have either a background within the wireless communication industry as a researcher, or a Ph.D. in an area relevant for the future generation of wireless communication systems.
- Knowledge of 3GPP functionality, physical layer aspects and experience of innovation and IPR is required.
- Up-to-date knowledge about new research trends and an extensive academic network within the EU is required.
- A track record of a successful and positive leadership
- A role model that can develop, empower and encourage team members
- Communicate fluently in English, both verbally and in writing.




Required skills/personal characteristics

- A role model that can develop, empower and encourage team members
- Communicate fluently in English, both verbally and in writing.


For more information about the position: [email protected]

Location: Lund Research Center, Huawei Sweden Visa mindre
Ansök

CTO / Technical Lead till Startup i tillväxtfas

Ansök    Nov 3    Standby Workteam AB    Utvecklingsingenjör, el-tele
SenseNode utvecklar och säljer energi- och driftsövervakningssystem till tillverkningsindustrin och fastighetsbranschen. Genom moderna IoT-sensorer samlas data in kostnadseffektivt som sedan presenteras och analyseras i molnbaserad programvara. Kunderna finns över hela Sverige med tyngdpunkt i Skåne och nu är även kunder i Danmark, Tyskland och Polen etablerade. SenseNode är ett litet bolag med stor potential och med mycket namnkunniga kunder. Var med på d... Visa mer
SenseNode utvecklar och säljer energi- och driftsövervakningssystem till tillverkningsindustrin och fastighetsbranschen. Genom moderna IoT-sensorer samlas data in kostnadseffektivt som sedan presenteras och analyseras i molnbaserad programvara. Kunderna finns över hela Sverige med tyngdpunkt i Skåne och nu är även kunder i Danmark, Tyskland och Polen etablerade. SenseNode är ett litet bolag med stor potential och med mycket namnkunniga kunder. Var med på den roliga resan att bygga ett tillväxtbolag! Huvudkontor finns på Ideon i Lund. För mer information gå gärna in på www.sensenode.com


CTO / Technical Lead till Startup i tillväxtfas


Brinner du för teknik och vill jobba brett som CTO / Technical Lead i en startup med stora möjligheter att utveckla och utvecklas? Vår nuvarande Technical Lead går vidare i karriären och vi söker nu den som vill axla ansvaret i nästa fas av vår utveckling. Om du trivs i startup-miljö och i roller med högt teknikinnehåll och med stora möjligheter att påverka/bygga är detta kanske din nästa utmaning? Du får vara med på en spännande resa i en av Lunds lovande Startups!

Dina ansvarsområden
Utveckling av företagets tekniska plattform innefattande både hårdvara och mjukvara
Samarbeta med övriga teknikavdelningen kring leverans och support av systemlösningar
Projektleda utvecklings- och leveransprojekt
Medverkande vid sälj & marknadsföringsaktiviteter
Customer Success Management – se till att kunderna är nöjda och uppmuntra till användning av systemet, bidra till att kundvärdena uppnås



Din bakgrund
Du älskar teknik, är påläst kring vad som är möjligt med olika tekniska lösningar och har förmåga att djupdyka där det behövs. Vi ser gärna att du har jobbat med IoT, Cloud och Analytics på teknisk nivå och har förmåga att driva den tekniska utvecklingen på ett övergripande plan. Det är meriterande om du har förståelse för mjukvaruutveckling, då rollen innebär kravställande och styrning och utveckling. Har du automationskompetens från industri / fastighet ses även det som en fördel, liksom el- och energikompetens. Mycket goda kunskaper i svenska och engelska krävs i både tal och skrift.

Din personlighet
Att jobba i en Startup kräver något speciellt! Du är nyfiken och orädd och det är viktigt att du är prestigelös då alla hjälper till med allt. Du har mycket energi och hög arbetsmoral och med din utmärkta sociala kompetens skapar du förtroende hos våra kunder.


Tjänsten är på heltid och tillsvidare. För rätt kandidat finns möjlighet till delägarskap.

I denna rekrytering samarbetar SenseNode med Standby Workteam. Vi rekryterar löpande och du är välkommen att sända in din ansökan snarast via länken. För mer information om tjänsten kontakta gärna Kristian Berglund, Standby Workteam, tel 0709-605372.

Välkommen med din ansökan! Visa mindre
Ansök

Radio integration engineer

Ansök    Okt 11    Ericsson AB    Utvecklingsingenjör, el-tele
About this opportunity Business Area Networks: where 5G was born! We’re a global team of approx. 26 000 in 93 countries, with 126 nationalities represented. About half of us work in R&D, approx. 6 000 in Group Supply and 5 000 in Service Area Networks. Together we build future-proof, scalable network architectures in an industry that is constantly on the move. Our approach is simple: we build solutions that empower our customers to meet tomorrow’s demands.... Visa mer
About this opportunity
Business Area Networks: where 5G was born! We’re a global team of approx. 26 000 in 93 countries, with 126 nationalities represented. About half of us work in R&D, approx. 6 000 in Group Supply and 5 000 in Service Area Networks. Together we build future-proof, scalable network architectures in an industry that is constantly on the move. Our approach is simple: we build solutions that empower our customers to meet tomorrow’s demands. 5G is happening now!
Are you a doer with a passion for solving problems? Are you up to date with the latest within radio technology?
Join the team who is responsible for Radio Product Integration, we are now seeking a new team member for our office in Lund.

What you will do
Secure and optimize the radio unit’s functionality and RF performance to be as good as possible.
Work in teams mastering radio product components in an Agile environment.
Work in an international surrounding and cooperating with our colleges in various countries is our daily business.
Take care of sophisticated and exciting issues originating from the manufacturing of our products all the way to customer issues in the field.
Work with mmWave 5G NR radios, where Ericsson is leading the industry with more than 60% of live market share.
Have access to our well-equipped Integration lab and do hands-on work with RF equipment and OTA chambers.
Work with the latest tools and products within Telecom, it will give a phenomenal network at Ericsson especially within I&V, production, and design.



To be successful in the role you must have
Master’s degree in Electronics Engineering or equivalent
RF and radio knowledge such as RF measurement technics, instrument handling, wireless systems, and Digital Signal Analysis
Basic programming skills (C#, MATLAB, Vee)
Self-motivation with an outstanding ability to learn, share, and to support.
Flexibility and innovation skills
Proficient in English speaking and writing



Why join Ericsson?
At Ericsson, you´ll have an outstanding opportunity. The chance to use your skills and imagination to push the boundaries of what´s possible. To build never seen before solutions to some of the world’s toughest problems. You´ll be challenged, but you won’t be alone. You´ll be joining a team of diverse innovators, all driven to go beyond the status quo to craft what comes next.

What happens once you apply?
Click Here to find all you need to know about what our typical hiring process looks like.
We look forward to receiving your application in English. Please note we cannot accept applications via email.
Primary location for this role: Lund, Sweden
For specific questions please contact Recruiter: Therese Roos, [email protected]


Encouraging a diverse and inclusive organization is core to our values at Ericsson, that's why we nurture it in everything we do. We truly believe that by collaborating with people with different experiences we drive innovation, which is essential for our future growth. We encourage people from all backgrounds to apply and realize their full potential as part of our Ericsson team.
Ericsson is proud to be an Equal Opportunity and Affirmative Action employer, learn more.
Primary country and city: Sweden (SE) || Sweden : Skåne : Lund
Req ID: 697587 Visa mindre
Ansök

CTO / Technical Lead till Startup i tillväxtfas

Ansök    Sep 4    Standby Workteam AB    Utvecklingsingenjör, el-tele
SenseNode utvecklar och säljer energi- och driftsövervakningssystem till tillverkningsindustrin och fastighetsbranschen. Genom moderna IoT-sensorer samlas data in kostnadseffektivt som sedan presenteras och analyseras i molnbaserad programvara. Kunderna finns över hela Sverige med tyngdpunkt i Skåne och nu är även kunder i Danmark, Tyskland och Polen etablerade. SenseNode är ett litet bolag med stor potential och med mycket namnkunniga kunder. Var med på d... Visa mer
SenseNode utvecklar och säljer energi- och driftsövervakningssystem till tillverkningsindustrin och fastighetsbranschen. Genom moderna IoT-sensorer samlas data in kostnadseffektivt som sedan presenteras och analyseras i molnbaserad programvara. Kunderna finns över hela Sverige med tyngdpunkt i Skåne och nu är även kunder i Danmark, Tyskland och Polen etablerade. SenseNode är ett litet bolag med stor potential och med mycket namnkunniga kunder. Var med på den roliga resan att bygga ett tillväxtbolag! Huvudkontor finns på Ideon i Lund. För mer information gå gärna in på www.sensenode.com


CTO / Technical Lead till Startup i tillväxtfas


Brinner du för teknik och vill jobba brett som CTO i en startup med stora möjligheter att utveckla och utvecklas? Vår nuvarande Technical Lead / CTO går vidare i karriären och vi söker nu den som vill axla ansvaret i nästa fas av vår utveckling. Om du trivs i startup-miljö och i roller med högt teknikinnehåll och med stora möjligheter att påverka/bygga är detta kanske din nästa utmaning? Du får vara med på en spännande resa i en av Lunds lovande Startups!

Dina ansvarsområden
* Utveckling av systemlösning och koordinering med mjukvaruutvecklingen
* Service & support
support av systemlösningar, telefonkontakt med kunder samt koordinering med mjukvaruavdelningen
servicebesök på plats hos kunder

* Bygg & leverans
inköp av komponenter
leverans av produkter
koordinering elektriker och kundkontakter
ansvarig för driftsättning hos kund
kundutbildning av systemet

* Säljsupport
delta i kundmöten för teknisk support
ansvarig för ”systemering” – dvs fysisk genomgång av mätpunkter hos kund och planering av nödvändig hårdvara samt installations-setup
medverkande vid sälj & marknadsföringsaktiviteter
Customer Success Manager – se till att kunderna är nöjda och uppmuntra till användning av systemet, bidra till att kundvärdena uppnås



Din bakgrund
Du är förmodligen elektronik- eller radioingenjör i botten, eller har motsvarande utbildning alt. erfarenhet. Du har jobbat med IoT på teknisk nivå och har förståelse för mjukvaruutveckling. Du har förmåga att driva den tekniska utvecklingen på ett övergripande plan. Har du automationskompetens från industri / fastighet ses det som meriterande. Mycket goda kunskaper i svenska och engelska i både tal och skrift.




Din personlighet
Att jobba i en Startup kräver något speciellt! Du är nyfiken och orädd och det är viktigt att du är prestigelös då alla hjälper till med allt. Du har mycket energi och hög arbetsmoral och med din utmärkta sociala kompetens skapar du förtroende hos våra kunder.


Tjänsten är på heltid och tillsvidare. För rätt kandidat finns möjlighet till delägarskap.


I denna rekrytering samarbetar SenseNode med Standby Workteam. Vi rekryterar löpande och du är välkommen att sända in din ansökan snarast via länken. För mer information om tjänsten kontakta gärna Kristian Berglund, Standby Workteam, tel 0709-605372.


Välkommen med din ansökan! Visa mindre
Ansök
Copyright © 2026 - Alla rättigheter reserverade.